Mint FAQ
For any product or application related question just type here ?
Mint FAQ
Password: 0
No, all are separate modules for DI – DO – AO – AI
Yes. all 16 digital inputs have 32 bit counters with UP/Down counting feature. and it also supports storage of counters during power OFF. so values are retained
15 Modbus Slave devices can connect on RS-485 Master Port. Two RS-485 ports available. one port active at a time
All Standard MINT IOs are having 2 RS485 Modbus RTU Slave available. Ethernet model having one MODBUS TCP/IP port and one RS485 MODBUS RTU slave port available
0/4-20mA and 0/2- 10VDC outputs are available. both models are separate models.
MINT-AO-I
MINT-AO-V
Yes. only in Current and Voltage Inputs. -2000 to 20000 Counts
Outdoor range- Clear Line Of Site without Obstacles > 1Km
Upto 256. 247 IOs with 8 Repeaters after every 31 MINT IOs in a single RS-485 loop
120 ohm Termination resistor is available via switch selection on the front of IO.
Switch No. 9 for RS-485 Port-1/Switch No.10 for RS-485 Port-2
No but 3 Ports Isolation is available. 1500 VAC for 1 Min
1> Power Supply to Field IO
2> Power supply to Communication Ports
3> Communication Ports to Field IO signals
No but 3 Ports Isolation is available. 1500 VAC for 1 Min
1> Power Supply to Field IO
2> Power supply to Communication Ports
3> Communication Ports to Field IO signals
Source and sink both types of Open collector Outputs are available. Its Factory Set.